Setup Summary

  • Board: Neonode Prototyping Board
    Include URL in Board Manager:
  • Programmer: AVRISP mrkII (or USBtinyISP
  • Arduino Library: zForce Arduino Library

Setup Guide for Arduino IDE

Install and Select Neonode Prototyping Board

  1. Go to File >> Preferences.

  2. in Preferences, navigate to Additional Boards Manager URLs and include the following URL:

    If you have multiple URLs in your Board Manager, you can separate each link with a comma (,) or press the pop-up icon and paste the URL on a new row.

  1. Press OK.

  2. Now, go to Tools >> Boards >> Boards Manager, and type "Neonode Prototyping Board" in the search field.
  3. Press Install to install the board preset.
  4. When the installation is complete, Select the new board by going to Tools >> Board >> Neonode Prototyping Board.

Select AVRISP mrkII as Programmer

  1. Go to Tools >> Programmer >> AVRISP mrkII.

    1. Alternatively, you can set USBtinyISP as your programmer.

Include zForce Arduino Library

Please refer to our zForce Arduino Library for easier implementation and communication with the sensor module.

  • No labels