• Created by Unknown User (anton.olin), last modified by Unknown User (nike.olabiyi) on Jan 31, 2022

Contents of Release

  • First release of zForce Programmer 1.0.0

Main Features

  • Update the firmware.
  • Supports .dfu and .hex firmware files.
  • Displays device information such as MCU identifier and current firmware version if applicable for selected sensor.
  • Configure parameters in the sensor that persists through power cycling.
  • Save your specific parameters as a .json file.
  • Load saved parameters from a .json file.

Known Issues

  • Application will crash if only one value is added for parameters where a value pair is expected, for example the pair Min X and Max X.
  • Application Firmware Update will not work after the install of zForce Programmer. (Due to ST-DFU drivers.)
  • When selecting a DFU file the tool will convert the DFU to HEX for deployment to the TSM. This file will remain next to the DFU file.
  • "Failed to set the device in configuration mode" error can occur occasionally when writing firmware or reading / writing parameters. Either reconnect the sensor or restart the application.


  • No labels