You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
Version 1
Current »
Contents of Release
- First release of zForce Programmer 1.0.0.0 Beta
Known deviations
- When writing a firmware to the sensor, one thread will run at 100% for the duration of the erase/write task.
- If a sensor is manually set in DFU mode and a parameter read/write is performed it will display an inaccurate error message. To get around this, leave DFU mode by pressing the button "Leave Configuration Mode" or simply connect the sensor without entering DFU mode.