Touch Performance Specification
| Item | Specification |
|---|---|
| Input methods | Finger, hand or glove. |
| Minimum object size (diameter) | 5 mm |
| Number of touch objects | 1, 2, or more, depending on application |
| Touch resolution | 0.1 mm |
| Touch activation force | 0 N (no activation force required) |
| Touch Active Area | Up to 345.6 x 327.7 mm. For details, refer to information on product variants in Introduction. |
| Response time | ~50 ms (initial touch, at 33 Hz in idle mode) 10 ms (continuous tracking, at 100 Hz in active mode) |
| Scanning frequency | Configurable up to 900 Hz, depending on product variant. For details, refer to Touch Performance. |
Touch accuracy
The specified values are valid for the used test setup. For more information, refer to Performance Test Methods. The touch accuracy is measured inside the TAA, using a silicone based cylindrical test rod with a diameter of 16 mm.
Touch Accuracy for Normal Range Sensor Modules of the 90° and 0° Types
Product Number | Typical Value (mm) | μ ± 2σ (mm) | |
|---|---|---|---|
| NNAMC346XPC01 | 1.5 | 3.5 | |
| NNAMC310XPC01 | 1.5 | 3.5 | |
| NNAMC295XPC01 | 1.5 | 3.5 | |
| NNAMC230XPC01 | 1.5 | 3.5 | |
| NNAMC209XPC01 | 1.5 | 3.5 | |
| NNAMC180XPC01 | 1.5 | 3.5 | |
| NNAMC158XPC01 | 1.5 | 3.5 | |
| NNAMC122XPC01 | 1.5 | 3.5 | |
| NNAMC115XPC01 | 1.5 | 4 | |
| NNAMC1011PC01 | 1.5 | 4 | |
Typical Value: The accuracy on average, within the TAA.
μ ± 2σ: 95% of reported touch positions deviate less than this value. (2σ standard deviation).
Product number: "X" indicates if the sensor module is of type 0º ("0") or 90º ("1").
The accuracy specification (normal range, 0° and 90°) is valid for units produced from 15th January 2020. Please contact our support team for specification regarding earlier produced sensor modules, or general questions about the accuracy specification.
Touch Accuracy for Extended Range Sensor Modules of the 90° and 0° Types
Product Number | Typical Value (mm) | μ ± 2σ (mm) | |
|---|---|---|---|
| NNAMC346XPC01 | 2.5 [1] | 5 [1] | |
Typical Value: The accuracy on average, within the TAA.
μ ± 2σ: 95% of reported touch positions deviate less than this value. (2σ standard deviation).
Product number: "X" indicates if the sensor module is of type 0º ("0") or 90º ("1").
[1] The extended range FW is for evaluation purpose only, thus these values are preliminary and not guaranteed.
The accuracy specification (extended range, 0° and 90°) is preliminary and for evaluation purpose only. There are no guarantees concerning the accuracy values for extended range. Please contact our support team for more information.
Technical Specification
| Item | Sensor module Variant | Specification |
|---|---|---|
Module size (LxHxW) | 0° Type | L x 3.46 x 14.5 mm L depending on product variant. |
| 90° Type | L x 3.46 x 16.05 mm L depending on product variant. | |
Power consumption | NNAMC0720PC01, NNAMC0721PC01 | 57 mW |
| NNAMC2090PC01, NNAMC2091PC01 | 80 mW | |
| NNAMC3460PC01, NNAMC3461PC01 | 104 mW | |
NNAMC3460PC01, Extended Range | 135 mW | |
Power consumption | NNAMC0720PC01, NNAMC0721PC01 | 44 mW |
| NNAMC2090PC01, NNAMC2091PC01 | 45 mW | |
| NNAMC3460PC01, NNAMC3461PC01 | 47 mW | |
NNAMC3460PC01, Extended Range | 61 mW |