There are two variants of the holders for our Touch Sensor Modules (TSM) available, for 0 and 90 degrees. These have different dimensions so that they can be used in different conditions (see Table 1). For STEP and STL files of the holders, please refer to Downloads, Firmware.

Holders for 0 degrees TSM:s

The pictures below illustrate the holders for 0 degrees Touch Sensor Modules.     

Picture 1. 0 degrees TSM placement on the screen surface. Suitable for holders with part number: 002310, 002311, 002312, 002313 and 002390.

Picture 2. 0 degrees TSM placement on the edge the display. Suitable for holders with part number:  002314, 002316, 002317, 002319 and 002389.    

Holders for 90 degrees TSM:s

The pictures below illustrate the holders for 90 degrees Touch Sensor Modules.

Picture 3. 90 degrees TSM placement on the screen surface. Suitable for holders with part number: 002314, 002316, 002317, 002319 and 002389.

Picture 4. 90 degrees TSM placement on the edge of the display. Suitable for holders with part number: 002348, 002350, 002351, 002352 and 002391.

   




Dimensions of the Touch Sensor Module holders


Please see the dimensions of the holders in the table below (Table 1).

Table 1. Dimensions of the holders for Touch Sensor Modules

Part numberA (mm)Suitable for / Mount onSee figure
002311100° screen surface1
002312200° screen surface1
002310300° screen surface1
002313400° screen surface1
002390500° screen surface1
0023521090° screen edge4
0023482090° screen edge4
0023503090° screen edge4
0023514090° screen edge4
0023915090° screen edge4
002316100° screen edge & 90°screen surface2 resp. 3
002314200° screen edge & 90°screen surface2 resp. 3
002317300° screen edge & 90°screen surface2 resp. 3
002319400° screen edge & 90°screen surface2 resp. 3
002389500° screen edge & 90°screen surface2 resp. 3


For STEP and STL files please refer to Downloads, Firmware.





  • No labels