Physical Dimensions and Position of Origin
All the sizes are presented in millimeters.
A - the width of the Touch Active Area (TAA), X - axis.
B - the length of the TAA, Y - axis.
C - the physical length of the sensor.
D - the distance/withdrawal from the edge of the sensor to the edge of the TAA.
Different Touch Sensor Module types vary in physical length, dimensions C and D, and thus also in the TAA sizes, dimensions A and B. The Touch Sensor Modules comes with a firmware with a configurable B dimension, according to the table below.
The availability and the dimensions for the Neonode® Touch Sensor Modules are summarized in Table 1 below.
Table 1. Neonode Touch Sensor Modules available for purchase:
|Product number||Measurements (mm)|
|0°||90°||A||B, default||B, max||C||D|
If you are interested in Touch Sensor Modules of other dimensions than those listed in Table 1, please, contact your local sales representative or email@example.com.
These measurements are identical for all sensor module's lengths but vary some between the 0° and 90 ° types. The position of origin is marked with "zero software".
90 ° Type
The Touch Sensor Modules are packed in trays stacked in cardboard boxes.
The image below shows the dimensions of the tray:
- Specifications Summary
- Touch Performance
- Power Consumption
- Environmental Requirements
- Electrical Requirements
- Optical Requirements on External Window
- Mechanical Data
- Test Specifications and Definitions
- Getting started with Touch Sensor Module Evaluation
- Getting Started with Software Integration
- Introduction to Contactless Touch Solutions
- Mechanical Integration
- Electrical Integration
- Software Integration
- Implementation Examples
- Legal Notice